【华为】BFD与静态路由和RIP联用

本文主要是介绍【华为】BFD与静态路由和RIP联用，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

【华为】BFD与静态路由和RIP联用

实验需求
配置
- AR1
- AR2
- AR3
- AR4
- 效果
- 抓包查看

在这里插入图片描述

实验需求

如上图组网所示，在R1上配置到达R4的Loopback0。
4.4.4.4/32网段的浮动静态路由，正常情况下通过R3访问R4。
当R3故障时，自动选路通过R2访问R4的Loopback0;在R1与R3之间建立BFD会话，并与静态路由绑定，实现故障快速检测和路径快速收敛。

配置

AR1

<AR1>system-view
Enter system view, return user view with Ctrl+Z.
[AR1]sysname AR1[AR1]undo info-center enable 
Info: Information center is disabled.[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]ip address 13.13.13.1 24
[AR1-GigabitEthernet0/0/0]quit[AR1]int g0/0/01
[AR1-GigabitEthernet0/0/1]ip address 12.12.12.1 24
[AR1-GigabitEthernet0/0/1]qu## 开启BFD功能
[AR1]bfd
[AR1-bfd]qu[AR1]bfd 13 bind peer-ip 13.13.13.3 interface GigabitEthernet 0/0/0
[AR1-bfd-session-13]discriminator local 10
[AR1-bfd-session-13]discriminator remote 20
[AR1-bfd-session-13]commit
[AR1-bfd-session-13]qu[AR1]ip route-static 4.4.4.4 32 13.13.13.3 track bfd-session 13
[AR1]ip route-static 4.4.4.4 32 12.12.12.2 preference 100

AR2

<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR2[AR2]undo info-center enable 
Info: Information center is disabled.[AR2]int g0/0/0
[AR2-GigabitEthernet0/0/0]ip address 12.12.12.2 24
[AR2-GigabitEthernet0/0/0]quit[AR2]int g0/0/1
[AR2-GigabitEthernet0/0/1]ip address 24.24.24.2 24
[AR2-GigabitEthernet0/0/1]quit## 开启BFD功能
[AR2]bfd
[AR2-bfd]qu## RIPv2的宣告
[AR2]rip
[AR2-rip-1]version 2
[AR2-rip-1]undo summary
[AR2-rip-1]bfd all-interface enable                   ## RIP的全接口启用BFD
[AR2-rip-1]network 12.0.0.0
[AR2-rip-1]network 24.0.0.0
[AR2-rip-1]quit

AR3

<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname AR3[AR3]undo info-center enable 
Info: Information center is disabled.[AR3]int g0/0/0
[AR3-GigabitEthernet0/0/0]ip address 13.13.13.3 24
[AR3-GigabitEthernet0/0/0]qu[AR3]int g0/0/01
[AR3-GigabitEthernet0/0/1]ip address 34.34.34.3 24
[AR3-GigabitEthernet0/0/1]qu## 开启BFD功能
[AR3]bfd
[AR3-bfd]qu[AR3]bfd 31 bind peer-ip 13.13.13.1 interface g0/0/0
[AR3-bfd-session-31]discriminator local 20
[AR3-bfd-session-31]discriminator remote 10
[AR3-bfd-session-31]commit
[AR3-bfd-session-31]qu## RIPv2的宣告
[AR3]rip 
[AR3-rip-1]version 2
[AR3-rip-1]undo summary
[AR3-rip-1]bfd all-interface enable                   ## RIP的全接口启用BFD
[AR3-rip-1]network 13.0.0.0
[AR3-rip-1]network 34.0.0.0
[AR3-rip-1]qu

AR4


<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname AR4[AR4]undo info-center enable 
Info: Information center is disabled.[AR4]int g0/0/0
[AR4-GigabitEthernet0/0/0]ip address 34.34.34.4 24
[AR4-GigabitEthernet0/0/0]qu[AR4]int g0/0/01
[AR4-GigabitEthernet0/0/1]ip address 24.24.24.4 24
[AR4-GigabitEthernet0/0/1]qu[AR4]int loopback 0
[AR4-LoopBack0]ip address 4.4.4.4 32
[AR4-LoopBack0]qu## 开启BFD功能
[AR4]bfd
[AR4-bfd]qu## RIPv2的宣告
[AR4]rip
[AR4-rip-1]version 2
[AR4-rip-1]undo summary
[AR4-rip-1]bfd all-interface enable                   ## RIP的全接口启用BFD
[AR4-rip-1]network 34.0.0.0
[AR4-rip-1]network 24.0.0.0
[AR4-rip-1]network 4.0.0.0
[AR4-rip-1]qu