本文主要是介绍SLAM算法与工程实践——相机篇：传统相机使用（1），希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
SLAM算法与工程实践系列文章
下面是SLAM算法与工程实践系列文章的总链接，本人发表这个系列的文章链接均收录于此
SLAM算法与工程实践系列文章链接
下面是专栏地址：
SLAM算法与工程实践系列专栏
文章目录
- SLAM算法与工程实践系列文章
- SLAM算法与工程实践系列文章链接
- SLAM算法与工程实践系列专栏
- 前言
- SLAM算法与工程实践——相机篇：传统相机使用（1）
- 相机相关命令
- 出现的问题
- 调用相机
- 以MJPG格式打开相机
前言
这个系列的文章是分享SLAM相关技术算法的学习和工程实践
SLAM算法与工程实践——相机篇：传统相机使用（1）
相机相关命令
插上USB相机，使用命令查看USB设备
lsusb
可以识别相机
使用命令查看识别到几个摄像头
ll /dev/video*
然后改变其权限
sudo chmod 777 /dev/video0
sudo chmod 777 /dev/video1
安装 v4l-utils 工具包
sudo apt-get install v4l-utils
使用下列命令查看相机参数
v4l2-ctl -d /dev/video0 --list-formats-ext
在命令行输出为：
ioctl: VIDIOC_ENUM_FMTType: Video Capture[0]: 'MJPG' (Motion-JPEG, compressed)Size: Discrete 2560x800Interval: Discrete 0.017s (60.000 fps)Interval: Discrete 0.033s (30.000 fps)Interval: Discrete 0.067s (15.000 fps)Size: Discrete 2560x720Interval: Discrete 0.017s (60.000 fps)Interval: Discrete 0.033s (30.000 fps)Size: Discrete 1280x800Interval: Discrete 0.008s (120.000 fps)Interval: Discrete 0.017s (60.000 fps)Interval: Discrete 0.033s (30.000 fps)Size: Discrete 1280x792Interval: Discrete 0.008s (120.000 fps)Interval: Discrete 0.017s (60.000 fps)Interval: Discrete 0.033s (30.000 fps)Size: Discrete 1280x400Interval: Discrete 0.008s (120.000 fps)Interval: Discrete 0.017s (60.000 fps)Interval: Discrete 0.033s (30.000 fps)Size: Discrete 640x400Interval: Discrete 0.005s (210.000 fps)Interval: Discrete 0.008s (120.000 fps)Interval: Discrete 0.017s (60.000 fps)Size: Discrete 640x392Interval: Discrete 0.005s (210.000 fps)Interval: Discrete 0.008s (120.000 fps)Interval: Discrete 0.017s (60.000 fps)[1]: 'YUYV' (YUYV 4:2:2)Size: Discrete 2560x800Interval: Discrete 0.500s (2.000 fps)Size: Discrete 2560x720Interval: Discrete 0.500s (2.000 fps)Size: Discrete 1280x800Interval: Discrete 0.200s (5.000 fps)Size: Discrete 1280x792Interval: Discrete 0.200s (5.000 fps)Size: Discrete 1280x400Interval: Discrete 0.067s (15.000 fps)Interval: Discrete 0.100s (10.000 fps)Size: Discrete 640x400Interval: Discrete 0.033s (30.000 fps)Size: Discrete 640x392Interval: Discrete 0.033s (30.000 fps)可以看出本相机的参数和对应设置下的帧率，最高为 120 帧，分辨率为 2560x800，我这选用 1280x400
接下来看看你的USB摄像头支持什么附加属性，只需要执行下面的命令即可
v4l2-ctl -d /dev/video0 --list-ctrls
得到下面的结果
User Controlsbrightness 0x00980900 (int) : min=-64 max=64 step=1 default=0 value=0contrast 0x00980901 (int) : min=0 max=95 step=1 default=0 value=0saturation 0x00980902 (int) : min=0 max=100 step=1 default=64 value=64hue 0x00980903 (int) : min=-2000 max=2000 step=1 default=0 value=0white_balance_automatic 0x0098090c (bool) : default=1 value=1gamma 0x00980910 (int) : min=100 max=300 step=1 default=100 value=100
使用应用程序茄子（cheese）
输入命令：
sudo apt-get install cheese
装好后，用命令：cheese，即可打开。如果指定打开video1，输入命令：
cheese -d /dev/video1
读取相机配置文件 HBV-1780-2.yaml
int UseStereoCam::loadCamParam(std::string cfgPath) {cv::FileStorage fs(cfgPath, cv::FileStorage::READ);if (fs.isOpened()) {std::cout << "Stereo Camera Paramter is loading..." << std::endl;//内参矩阵fs["IntrinsicMatrixLeft"] >> IntrinsicMatrixLeft; //存放内参矩阵,左相机IntrinsicMatrixLeft.at<double>(0, 0) = IntrinsicMatrixLeft.at<double>(0, 0) * resizeScalse;IntrinsicMatrixLeft.at<double>(1, 1) = IntrinsicMatrixLeft.at<double>(1, 1) * resizeScalse;IntrinsicMatrixLeft.at<double>(0, 2) = IntrinsicMatrixLeft.at<double>(0, 2) * resizeScalse;IntrinsicMatrixLeft.at<double>(1, 2) = IntrinsicMatrixLeft.at<double>(1, 2) * resizeScalse;fs["IntrinsicMatrixRight"] >> IntrinsicMatrixRight; //存放内参矩阵,右相机IntrinsicMatrixRight.at<double>(0, 0) = IntrinsicMatrixRight.at<double>(0, 0) * resizeScalse;IntrinsicMatrixRight.at<double>(1, 1) = IntrinsicMatrixRight.at<double>(1, 1) * resizeScalse;IntrinsicMatrixRight.at<double>(0, 2) = IntrinsicMatrixRight.at<double>(0, 2) * resizeScalse;IntrinsicMatrixRight.at<double>(1, 2) = IntrinsicMatrixRight.at<double>(1, 2) * resizeScalse;//畸变系数fs["DistCoeffLeft"] >> DistCoeffLeft; //畸变矩阵，左相机fs["DistCoeffRight"] >> DistCoeffRight; //畸变矩阵，右相机//旋转矩阵 平移向量fs["RotationMatrix"] >> R;fs["TranslationVector"] >> T;T = T * resizeScalse;fs.release();leftFocalLength =(IntrinsicMatrixLeft.at<double>(0, 0) + IntrinsicMatrixLeft.at<double>(1, 1)) / 2.0;rightFocalLength =(IntrinsicMatrixRight.at<double>(0, 0) + IntrinsicMatrixRight.at<double>(1, 1)) / 2.0;// 处理焦距（例如取平均值）focalLength = (leftFocalLength + rightFocalLength) / 2.0;fx = (IntrinsicMatrixLeft.at<double>(0, 0) + IntrinsicMatrixRight.at<double>(0, 0)) / 2.0;fy = (IntrinsicMatrixLeft.at<double>(1, 1) + IntrinsicMatrixRight.at<double>(1, 1)) / 2.0;cx = (IntrinsicMatrixLeft.at<double>(0, 2) + IntrinsicMatrixRight.at<double>(0, 2)) / 2.0;cy = (IntrinsicMatrixLeft.at<double>(1, 2) + IntrinsicMatrixRight.at<double>(1, 2)) / 2.0;baseline = cv::norm(T) / 100; //基线（baseline）单位设置为分米std::cout << "camera parameter loaded successfully!" << std::endl;return 0;} else {std::cout << "Failed to load camera parameter!" << std::endl;return -1;}}
出现的问题
参考：
解决OpenCV的GStreamer warning警告
在用opencv调用摄像头时报错
[ WARN:0] global ../modules/videoio/src/cap_gstreamer.cpp (935) open OpenCV | GStreamer warning: Cannot query video position: status=0, value=-1, duration=-1
[ WARN:0] global ../modules/videoio/src/cap_gstreamer.cpp (1758) handleMessage OpenCV | GStreamer warning: Embedded video playback halted; module v4l2src0 reported: Device '/dev/video0' failed during initialization
[ WARN:0] global ../modules/videoio/src/cap_gstreamer.cpp (515) startPipeline OpenCV | GStreamer warning: unable to start pipeline
[ WARN:0] global ../modules/videoio/src/cap_gstreamer.cpp (1057) setProperty OpenCV | GStreamer warning: no pipeline
[ WARN:0] global ../modules/videoio/src/cap_gstreamer.cpp (480) isPipelinePlaying OpenCV | GStreamer warning: GStreamer: pipeline have not been created
摄像头打开失败!
解决办法：
修改打开摄像头的代码如下：
cap.open(0,CAP_V4L2);
调用相机
在编写多个主函数共用src和include定义的类的文件时，CMakeLists.txt的编写应该类似下面的写法，然后包含每个子项目的子文件夹
cmake_minimum_required(VERSION 2.8)
project(DEPTH_COMPUTE)IF (NOT CMAKE_BUILD_TYPE)SET(CMAKE_BUILD_TYPE Release)
ENDIF ()MESSAGE("Build type: " ${CMAKE_BUILD_TYPE})# set path
set(LIB_PATH ${PROJECT_SOURCE_DIR}/lib)
set(HEAD_PATH ${PROJECT_SOURCE_DIR}/include)
set(EXEC_PATH ${PROJECT_SOURCE_DIR}/bin)set(DEPTH_LIB calc_depth) # set libiary namefind_package(OpenCV 4 REQUIRED)
find_package(Eigen3 3.1.0 NO_MODULE)
find_package(Pangolin REQUIRED)include_directories(${HEAD_PATH})
aux_source_directory(${PROJECT_SOURCE_DIR}/src LIB_SRC)SET(LIBRARY_OUTPUT_PATH ${LIB_PATH})
add_library(${DEPTH_LIB} SHARED ${LIB_SRC})
TARGET_LINK_LIBRARIES(${DEPTH_LIB}${OpenCV_LIBS}${EIGEN3_LIBS}${Pangolin_LIBRARIES}
)# add subdirectories 这里是具体的主函数
add_subdirectory(useCamForShot)
add_subdirectory(openCamera)子项目的CMakeLists.txt应该如下
cmake_minimum_required(VERSION 2.8)
project(OPENCAM)find_package(OpenCV 4 REQUIRED)include_directories(${HEAD_PATH})
link_directories(${LIB_PATH})set(CMAKE_BUILD_TYPE "Release")
set(CMAKE_CXX_FLAGS "-O3")
set(EXECUTABLE_OUTPUT_PATH ${EXEC_PATH})#add_library(${DEPTH_LIB} SHARED ${SRC_LIST})add_executable(open_camera open_camera.cpp)
target_link_libraries(open_camera ${DEPTH_LIB} ${OpenCV_LIBS})
以MJPG格式打开相机
参考：
OpenCV+V4L实现MJPG格式拉取USB摄像头
关于openCV VideoCapture获取摄像头MJPG视频的问题
相机支持的视频流格式
在打开相机后，设置参数
capture.open(camIndex, cv::CAP_V4L); // open camera//设置编码格式，这里只能写在分辨率和帧率后面，否则无效
capture.set(cv::CAP_PROP_FOURCC, cv::VideoWriter::fourcc('M', 'J', 'P', 'G'));//视频流格式
这篇关于SLAM算法与工程实践——相机篇：传统相机使用（1）的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
