SAP实现文本框多行输入（类cl_gui

SAP实现文本框多行输入（类cl_gui_textedit）

本文主要是介绍SAP实现文本框多行输入（类cl_gui_textedit），希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

参考文章：https://blog.csdn.net/SAPmatinal/article/details/130882962
先看效果，在输入框先来一段《赤壁赋》
在这里插入图片描述

然后点击 ‘保存输出’按钮，就能把输入内容从表里读取并输出来
在这里插入图片描述
源代码：

*&---------------------------------------------------------------------*
*& Report ZCYCLE060
*&---------------------------------------------------------------------*
*&
*&---------------------------------------------------------------------*
REPORT zcycle060.DATA: ok_code TYPE sy-ucomm.CONSTANTS: gc_text_line_length TYPE i VALUE 72.
TYPES: text_table_type(gc_text_line_length) TYPE c OCCURS 0.
DATA: gv_splitter TYPE REF TO cl_gui_easy_splitter_container.
DATA: gv_custom_container TYPE REF TO cl_gui_custom_container.
DATA: gv_text_editor TYPE REF TO cl_gui_textedit.
DATA: lt_text_table                         TYPE text_table_type,ls_text_table_wa(gc_text_line_length) TYPE c,gv_xthead_updkz                       TYPE i.
CALL SCREEN 100.MODULE splitter_control_vorbereiten OUTPUT.IF gv_splitter IS INITIAL.CREATE OBJECT gv_custom_containerEXPORTINGcontainer_name = 'SPLITTER_CONTAINER'.CREATE OBJECT gv_splitterEXPORTINGparent        = gv_custom_containerorientation   = 1    "方向: 0 = 垂直 ， 1 = 水平sash_position = 39.ENDIF.IF gv_text_editor IS INITIAL.CREATE OBJECT gv_text_editorEXPORTINGparent                     = gv_splitter->bottom_right_container
*       wordwrap_mode              = cl_gui_textedit=>wordwrap_at_windowborderwordwrap_to_linebreak_mode = cl_gui_textedit=>false  "自动换行模式关闭"wordwrap_to_linebreak_mode = cl_gui_textedit=>trueEXCEPTIONSerror_cntl_create          = 1error_cntl_init            = 2error_cntl_link            = 3error_dp_create            = 4gui_type_not_supported     = 5."CALL METHOD gv_text_editor->set_readonly_mode EXPORTING readonly_mode = cl_gui_textedit=>true. "输入框只读模式开启CALL METHOD gv_text_editor->set_readonly_mode EXPORTING readonly_mode = cl_gui_textedit=>false. "输入框只读模式关闭ENDIF.ENDMODULE.                 " SPLITTER_CONTROL_VORBEREITEN  OUTPUT
*&---------------------------------------------------------------------*
*&      Module  STATUS_0100  OUTPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE status_0100 OUTPUT.SET PF-STATUS 'ZCYCLE'.*  SET TITLEBAR 'xxx'.
ENDMODULE.
*&---------------------------------------------------------------------*
*&      Module  EXIT  INPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE exit INPUT.LEAVE TO SCREEN 0.
ENDMODULE.
*&---------------------------------------------------------------------*
*&      Module  USER_COMMAND_0100  INPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE user_command_0100 INPUT.DATA t_tdline1 TYPE TABLE OF standard .
* Texttabelle aus Control abholenCASE ok_code.WHEN 'ZSAVE'.CALL METHOD gv_text_editor->get_text_as_stream "取屏幕上输入的文本存到 lt_text_tableIMPORTINGtext                   = lt_text_tableis_modified            = gv_xthead_updkzEXCEPTIONSerror_dp               = 1error_cntl_call_method = 2OTHERS                 = 3.IF sy-subrc = 0.cl_demo_output=>write( lt_text_table[] ). "定义哪些东西需要输出，可以是表，也可以是字段cl_demo_output=>display( ).               "一次性把 write进来的元素 输出ENDIF.*      CALL METHOD gv_text_editor->get_text_as_r3table
*        IMPORTING
*          table = t_tdline1.
*      IF sy-subrc = 0.
*
*      ENDIF.ENDCASE.
ENDMODULE.

100屏幕设计
在这里插入图片描述

去SE80输入函数组 SLVC_FULLSCREEN 拉取标准ALV图标过来

做一丢丢改造

这里主要是用于程序退出功能

到这里就完成了。
程序会把屏幕上输入的文字传到内表 lt_text_table 里去
所以就是获取到屏幕上输入的文本框内容了，如果要做其它功能，就可以往下继续做了