LibSSH2简单入门-exec、sftp

2023-11-06 15:12
文章标签 简单 入门 exec sftp libssh2

本文主要是介绍LibSSH2简单入门-exec、sftp，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

LibSSH2简单入门-exec、sftp

1、libssh2官方地址：libssh2

libssh2的官方文档和官方示例代码非常的棒，基本可以直接参考

官方文档：libssh2 docs

官方示例：libssh2 examples

2、推荐阅读两个示例，基本可以完成对libssh2的理解和使用了

2.1、ssh2_exec.c 通过libssh2在远端机器上执行指令，并获取指令的返回值

/* Copyright (C) The libssh2 project and its contributors.** Sample showing how to use libssh2 to execute a command remotely.** The sample code has fixed values for host name, user name, password* and command to run.** $ ./ssh2_exec 127.0.0.1 user password "uptime"** SPDX-License-Identifier: BSD-3-Clause*/ #include "libssh2_setup.h"
#include <libssh2.h>#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif#include <stdio.h>
#include <stdlib.h>
#include <string.h>static const char *hostname = "127.0.0.1";
static const char *commandline = "uptime";
static const char *pubkey = "/home/username/.ssh/id_rsa.pub";
static const char *privkey = "/home/username/.ssh/id_rsa";
static const char *username = "user";
static const char *password = "password";static int waitsocket(libssh2_socket_t socket_fd, LIBSSH2_SESSION *session)
{struct timeval timeout;int rc;fd_set fd;fd_set *writefd = NULL;fd_set *readfd = NULL;int dir;timeout.tv_sec = 10;timeout.tv_usec = 0;FD_ZERO(&fd);FD_SET(socket_fd, &fd);/* now make sure we wait in the correct direction */ dir = libssh2_session_block_directions(session);if(dir & LIBSSH2_SESSION_BLOCK_INBOUND)readfd = &fd; if(dir & LIBSSH2_SESSION_BLOCK_OUTBOUND)writefd = &fd;rc = select((int)(socket_fd + 1), readfd, writefd, NULL, &timeout);return rc;
}int main(int argc, char *argv[])
{uint32_t hostaddr;libssh2_socket_t sock;struct sockaddr_in sin;const char *fingerprint;int rc;LIBSSH2_SESSION *session = NULL;LIBSSH2_CHANNEL *channel;int exitcode;char *exitsignal = (char *)"none";ssize_t bytecount = 0;size_t len;LIBSSH2_KNOWNHOSTS *nh;int type;#ifdef WIN32WSADATA wsadata;rc = WSAStartup(MAKEWORD(2, 0), &wsadata);if(rc) {fprintf(stderr, "WSAStartup failed with error: %d\n", rc);return 1;}
#endifif(argc > 1) {hostname = argv[1];  /* must be ip address only */ }if(argc > 2) {username = argv[2];}if(argc > 3) {password = argv[3];}if(argc > 4) {commandline = argv[4];}rc = libssh2_init(0);if(rc) {fprintf(stderr, "libssh2 initialization failed (%d)\n", rc);return 1;}hostaddr = inet_addr(hostname);/* Ultra basic "connect to port 22 on localhost".  Your code is* responsible for creating the socket establishing the connection*/ sock = socket(AF_INET, SOCK_STREAM, 0);if(sock == LIBSSH2_INVALID_SOCKET) {fprintf(stderr, "failed to create socket.\n");goto shutdown;}sin.sin_family = AF_INET;sin.sin_port = htons(22);sin.sin_addr.s_addr = hostaddr;if(connect(sock, (struct sockaddr*)(&sin), sizeof(struct sockaddr_in))) {fprintf(stderr, "failed to connect.\n");goto shutdown;}/* Create a session instance */ session = libssh2_session_init();if(!session) {fprintf(stderr, "Could not initialize SSH session.\n");goto shutdown;}/* tell libssh2 we want it all done non-blocking */ libssh2_session_set_blocking(session, 0);/* ... start it up. This will trade welcome banners, exchange keys,* and setup crypto, compression, and MAC layers*/ while((rc = libssh2_session_handshake(session, sock)) == LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Failure establishing SSH session: %d\n", rc);goto shutdown;}nh = libssh2_knownhost_init(session);if(!nh) {/* eeek, do cleanup here */ return 2;}/* read all hosts from here */ libssh2_knownhost_readfile(nh, "known_hosts",LIBSSH2_KNOWNHOST_FILE_OPENSSH);/* store all known hosts to here */ libssh2_knownhost_writefile(nh, "dumpfile", LIBSSH2_KNOWNHOST_FILE_OPENSSH);fingerprint = libssh2_session_hostkey(session, &len, &type);if(fingerprint) {struct libssh2_knownhost *host;int check = libssh2_knownhost_checkp(nh, hostname, 22,fingerprint, len,LIBSSH2_KNOWNHOST_TYPE_PLAIN|LIBSSH2_KNOWNHOST_KEYENC_RAW,&host);fprintf(stderr, "Host check: %d, key: %s\n", check,(check <= LIBSSH2_KNOWNHOST_CHECK_MISMATCH) ?host->key : "<none>");/****** At this point, we could verify that 'check' tells us the key is* fine or bail out.*****/ }else {/* eeek, do cleanup here */ return 3;}libssh2_knownhost_free(nh);if(strlen(password) != 0) {/* We could authenticate via password */ while((rc = libssh2_userauth_password(session, username, password)) ==LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Authentication by password failed.\n");goto shutdown;}}else {/* Or by public key */ while((rc = libssh2_userauth_publickey_fromfile(session, username,pubkey, privkey,password)) ==LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Authentication by public key failed.\n");goto shutdown;}}#if 0libssh2_trace(session, ~0);#endif/* Exec non-blocking on the remote host */ do {channel = libssh2_channel_open_session(session);if(channel ||libssh2_session_last_error(session, NULL, NULL, 0) !=LIBSSH2_ERROR_EAGAIN)break;waitsocket(sock, session);} while(1);if(!channel) {fprintf(stderr, "Error\n");exit(1);}while((rc = libssh2_channel_exec(channel, commandline)) == LIBSSH2_ERROR_EAGAIN) {waitsocket(sock, session);}if(rc) {fprintf(stderr, "exec error\n");exit(1);}for(;;) {ssize_t nread;/* loop until we block */ do {char buffer[0x4000];nread = libssh2_channel_read(channel, buffer, sizeof(buffer));if(nread > 0) {ssize_t i;bytecount += nread;fprintf(stderr, "We read:\n");for(i = 0; i < nread; ++i)fputc(buffer[i], stderr);fprintf(stderr, "\n");}else {if(nread != LIBSSH2_ERROR_EAGAIN)/* no need to output this for the EAGAIN case */ fprintf(stderr, "libssh2_channel_read returned %d\n",(int)nread);}}while(nread > 0);/* this is due to blocking that would occur otherwise so we loop onthis condition */ if(nread == LIBSSH2_ERROR_EAGAIN) {waitsocket(sock, session);}elsebreak;}exitcode = 127;while((rc = libssh2_channel_close(channel)) == LIBSSH2_ERROR_EAGAIN)waitsocket(sock, session);if(rc == 0) {exitcode = libssh2_channel_get_exit_status(channel);libssh2_channel_get_exit_signal(channel, &exitsignal, NULL, NULL, NULL, NULL, NULL);}if(exitsignal)fprintf(stderr, "\nGot signal: %s\n", exitsignal);elsefprintf(stderr, "\nEXIT: %d bytecount: %d\n",exitcode, (int)bytecount);libssh2_channel_free(channel);channel = NULL;shutdown:if(session) {libssh2_session_disconnect(session, "Normal Shutdown");libssh2_session_free(session);}if(sock != LIBSSH2_INVALID_SOCKET) {shutdown(sock, 2);
#ifdef WIN32closesocket(sock);
#elseclose(sock);
#endif} fprintf(stderr, "all done\n");libssh2_exit();return 0;
}

2.2、sftp_write_nonblock.c 使用libssh2进行sftp将本端文件传输到远端机器上的功能

/* Copyright (C) The libssh2 project and its contributors.** Sample showing how to do SFTP non-blocking write transfers.** The sample code has default values for host name, user name, password* and path to copy, but you can specify them on the command line like:** $ ./sftp_write_nonblock 192.168.0.1 user password thisfile /tmp/storehere** SPDX-License-Identifier: BSD-3-Clause*/ #include "libssh2_setup.h"
#include <libssh2.h>
#include <libssh2_sftp.h>#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif#include <stdio.h>
#include <time.h>   static const char *pubkey = "/home/username/.ssh/id_rsa.pub";
static const char *privkey = "/home/username/.ssh/id_rsa";
static const char *username = "username";
static const char *password = "password";
static const char *loclfile = "sftp_write_nonblock.c";
static const char *sftppath = "/tmp/sftp_write_nonblock.c";static int waitsocket(libssh2_socket_t socket_fd, LIBSSH2_SESSION *session)
{struct timeval timeout;int rc;fd_set fd;fd_set *writefd = NULL;fd_set *readfd = NULL;int dir;timeout.tv_sec = 10;timeout.tv_usec = 0;FD_ZERO(&fd);FD_SET(socket_fd, &fd);/* now make sure we wait in the correct direction */ dir = libssh2_session_block_directions(session);if(dir & LIBSSH2_SESSION_BLOCK_INBOUND)readfd = &fd;if(dir & LIBSSH2_SESSION_BLOCK_OUTBOUND)writefd = &fd;rc = select((int)(socket_fd + 1), readfd, writefd, NULL, &timeout);return rc;
}int main(int argc, char *argv[])
{uint32_t hostaddr;libssh2_socket_t sock;int i, auth_pw = 1;struct sockaddr_in sin;const char *fingerprint;int rc;LIBSSH2_SESSION *session = NULL;LIBSSH2_SFTP *sftp_session;LIBSSH2_SFTP_HANDLE *sftp_handle;FILE *local;char mem[1024 * 100];size_t nread;ssize_t nwritten;char *ptr;time_t start;libssh2_struct_stat_size total = 0;int duration;#ifdef WIN32WSADATA wsadata;rc = WSAStartup(MAKEWORD(2, 0), &wsadata);if(rc) {fprintf(stderr, "WSAStartup failed with error: %d\n", rc);return 1;}
#endifif(argc > 1) {hostaddr = inet_addr(argv[1]);}else {hostaddr = htonl(0x7F000001);}if(argc > 2) {username = argv[2];}if(argc > 3) {password = argv[3];}if(argc > 4) {loclfile = argv[4];}if(argc > 5) {sftppath = argv[5];}rc = libssh2_init(0);if(rc) {fprintf(stderr, "libssh2 initialization failed (%d)\n", rc);return 1;}local = fopen(loclfile, "rb");if(!local) {fprintf(stderr, "Cannot open local file %s\n", loclfile);return 1;}/** The application code is responsible for creating the socket* and establishing the connection*/ sock = socket(AF_INET, SOCK_STREAM, 0);if(sock == LIBSSH2_INVALID_SOCKET) {fprintf(stderr, "failed to create socket.\n");goto shutdown;}sin.sin_family = AF_INET;sin.sin_port = htons(22);sin.sin_addr.s_addr = hostaddr;if(connect(sock, (struct sockaddr*)(&sin), sizeof(struct sockaddr_in))) {fprintf(stderr, "failed to connect.\n");goto shutdown;}/* Create a session instance */ session = libssh2_session_init();if(!session) {fprintf(stderr, "Could not initialize SSH session.\n");goto shutdown;}/* Since we have set non-blocking, tell libssh2 we are non-blocking */ libssh2_session_set_blocking(session, 0);/* ... start it up. This will trade welcome banners, exchange keys,* and setup crypto, compression, and MAC layers*/ while((rc = libssh2_session_handshake(session, sock)) ==LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Failure establishing SSH session: %d\n", rc);goto shutdown;}/* At this point we have not yet authenticated.  The first thing to do* is check the hostkey's fingerprint against our known hosts Your app* may have it hard coded, may go to a file, may present it to the* user, that's your call*/ fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);fprintf(stderr, "Fingerprint: ");for(i = 0; i < 20; i++) {fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);}fprintf(stderr, "\n");if(auth_pw) {/* We could authenticate via password */ while((rc = libssh2_userauth_password(session, username, password)) ==LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Authentication by password failed.\n");goto shutdown;}}else {/* Or by public key */ while((rc = libssh2_userauth_publickey_fromfile(session, username,pubkey, privkey,password)) ==LIBSSH2_ERROR_EAGAIN);if(rc) {fprintf(stderr, "Authentication by public key failed.\n");goto shutdown;}}fprintf(stderr, "libssh2_sftp_init().\n");do {sftp_session = libssh2_sftp_init(session);if(!sftp_session &&libssh2_session_last_errno(session) != LIBSSH2_ERROR_EAGAIN) {fprintf(stderr, "Unable to init SFTP session\n");goto shutdown;}} while(!sftp_session);fprintf(stderr, "libssh2_sftp_open().\n");/* Request a file via SFTP */ do {sftp_handle = libssh2_sftp_open(sftp_session, sftppath,LIBSSH2_FXF_WRITE |LIBSSH2_FXF_CREAT |LIBSSH2_FXF_TRUNC,LIBSSH2_SFTP_S_IRUSR |LIBSSH2_SFTP_S_IWUSR |LIBSSH2_SFTP_S_IRGRP |LIBSSH2_SFTP_S_IROTH);if(!sftp_handle &&libssh2_session_last_errno(session) != LIBSSH2_ERROR_EAGAIN) {fprintf(stderr, "Unable to open file with SFTP: %ld\n",libssh2_sftp_last_error(sftp_session));goto shutdown;}} while(!sftp_handle);fprintf(stderr, "libssh2_sftp_open() is done, now send data.\n");start = time(NULL);do {nread = fread(mem, 1, sizeof(mem), local);if(nread <= 0) {/* end of file */ break;}ptr = mem;total += nread;do {/* write data in a loop until we block */ while((nwritten = libssh2_sftp_write(sftp_handle, ptr, nread)) ==LIBSSH2_ERROR_EAGAIN) {waitsocket(sock, session);}if(nwritten < 0)break;ptr += nwritten;nread -= nwritten;} while(nread);} while(nwritten > 0);duration = (int)(time(NULL) - start);fprintf(stderr, "%ld bytes in %d seconds makes %.1f bytes/sec\n",(long)total, duration, (double)total / duration);fclose(local);libssh2_sftp_close(sftp_handle);libssh2_sftp_shutdown(sftp_session);shutdown:if(session) {while(libssh2_session_disconnect(session, "Normal Shutdown") ==LIBSSH2_ERROR_EAGAIN);libssh2_session_free(session);}if(sock != LIBSSH2_INVALID_SOCKET) {shutdown(sock, 2);
#ifdef WIN32closesocket(sock);
#elseclose(sock);
#endif}fprintf(stderr, "all done\n");libssh2_exit();return 0;
}

注：示例代码中的fingerprint可以不一定需要使用。

这篇关于LibSSH2简单入门-exec、sftp的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！


http://www.chinasem.cn/article/357395。

相关文章

从入门到精通MySQL联合查询

从入门到精通MySQL联合查询

《从入门到精通MySQL联合查询》：本文主要介绍从入门到精通MySQL联合查询,本文通过实例代码给大家介绍的非常详细,需要的朋友可以参考下... 目录摘要1. 多表联合查询时mysql内部原理2. 内连接3. 外连接4. 自连接5. 子查询6. 合并查询7. 插入查询结果摘要前面我们学习了数据库设计时要满
阅读更多...
从入门到精通C++11 ＜chrono＞ 库特性

从入门到精通C++11 ＜chrono＞ 库特性

《从入门到精通C++11＜chrono＞库特性》chrono库是C++11中一个非常强大和实用的库,它为时间处理提供了丰富的功能和类型安全的接口,通过本文的介绍,我们了解了chrono库的基本概念... 目录一、引言1.1 为什么需要<chrono>库1.2<chrono>库的基本概念二、时间段（Durat
阅读更多...
解析C++11 static_assert及与Boost库的关联从入门到精通

解析C++11 static_assert及与Boost库的关联从入门到精通

《解析C++11static_assert及与Boost库的关联从入门到精通》static_assert是C++中强大的编译时验证工具,它能够在编译阶段拦截不符合预期的类型或值,增强代码的健壮性,通... 目录一、背景知识：传统断言方法的局限性1.1 assert宏1.2 #error指令1.3 第三方解决
阅读更多...
从入门到精通MySQL 数据库索引(实战案例)

从入门到精通MySQL 数据库索引(实战案例)

《从入门到精通MySQL数据库索引(实战案例)》索引是数据库的目录,提升查询速度,主要类型包括BTree、Hash、全文、空间索引,需根据场景选择,建议用于高频查询、关联字段、排序等,避免重复率高或... 目录一、索引是什么？能干嘛？核心作用：二、索引的 4 种主要类型（附通俗例子）1. BTree 索引（
阅读更多...
Redis 配置文件使用建议redis.conf 从入门到实战

Redis 配置文件使用建议redis.conf 从入门到实战

《Redis配置文件使用建议redis.conf从入门到实战》Redis配置方式包括配置文件、命令行参数、运行时CONFIG命令,支持动态修改参数及持久化,常用项涉及端口、绑定、内存策略等,版本8... 目录一、Redis.conf 是什么？二、命令行方式传参（适用于测试）三、运行时动态修改配置（不重启服务
阅读更多...
MySQL DQL从入门到精通

MySQL DQL从入门到精通

《MySQLDQL从入门到精通》通过DQL,我们可以从数据库中检索出所需的数据,进行各种复杂的数据分析和处理,本文将深入探讨MySQLDQL的各个方面,帮助你全面掌握这一重要技能,感兴趣的朋友跟随小... 目录一、DQL 基础：SELECT 语句入门二、数据过滤：WHERE 子句的使用三、结果排序：ORDE
阅读更多...
基于Python实现一个简单的题库与在线考试系统

基于Python实现一个简单的题库与在线考试系统

《基于Python实现一个简单的题库与在线考试系统》在当今信息化教育时代,在线学习与考试系统已成为教育技术领域的重要组成部分,本文就来介绍一下如何使用Python和PyQt5框架开发一个名为白泽题库系... 目录概述功能特点界面展示系统架构设计类结构图Excel题库填写格式模板题库题目填写格式表核心数据结构
阅读更多...
C/C++ chrono简单使用场景示例详解

C/C++ chrono简单使用场景示例详解

《C/C++chrono简单使用场景示例详解》：本文主要介绍C/C++chrono简单使用场景示例详解,本文通过实例代码给大家介绍的非常详细,对大家的学习或工作具有一定的参考借鉴价值,需要的朋友... 目录chrono使用场景举例1 输出格式化字符串chrono使用场景China编程举例1 输出格式化字符串示
阅读更多...
Python中OpenCV与Matplotlib的图像操作入门指南

Python中OpenCV与Matplotlib的图像操作入门指南

《Python中OpenCV与Matplotlib的图像操作入门指南》：本文主要介绍Python中OpenCV与Matplotlib的图像操作指南,本文通过实例代码给大家介绍的非常详细,对大家的学... 目录一、环境准备二、图像的基本操作1. 图像读取、显示与保存 使用OpenCV操作2. 像素级操作3.
阅读更多...
windows和Linux安装Jmeter与简单使用方式

windows和Linux安装Jmeter与简单使用方式

《windows和Linux安装Jmeter与简单使用方式》：本文主要介绍windows和Linux安装Jmeter与简单使用方式,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地... 目录Windows和linux安装Jmeter与简单使用一、下载安装包二、JDK安装1.windows设
阅读更多...

Copyright China编程 23002807@qq.com

沪ICP备2023033072号-2