本文主要是介绍Clickhouse监控_使用Prometheus+Grafana来监控Clickhouse服务和性能指标，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
官方文档https://clickhouse.com/docs/zh/operations/monitoring
建议使用Prometheus+Grafana组合监控Clickhouse服务和性能指标
1、把prometheus的clickhouse_exporter下载到Clickhouse服务器，查找prometheus的clickhouse_exporter参见https://prometheus.io/docs/instrumenting/exporters/#databases，查看clickhouse_exporter的git信息可以登陆到https://github.com/ClickHouse/clickhouse_exporter上面查看
root@DAILACHDBUD002:~# git clone https://github.com/ClickHouse/clickhouse_exporter.git
Cloning into 'clickhouse_exporter'...
remote: Enumerating objects: 1185, done.
remote: Counting objects: 100% (306/306), done.
remote: Compressing objects: 100% (162/162), done.
remote: Total 1185 (delta 179), reused 164 (delta 138), pack-reused 879
Receiving objects: 100% (1185/1185), 1.36 MiB | 5.99 MiB/s, done.
Resolving deltas: 100% (359/359), done.
2、进入下载后的clickhouse_exporter目录，对其进行编译，由于https://github.com/ClickHouse/clickhouse_exporter上看到clickhouse_exporter相关信息是golang，所以安装是golang再编译
root@DAILACHDBUD002:~# cd clickhouse_exporter/
root@DAILACHDBUD002:~/clickhouse_exporter# ll clickhouse_exporter
ls: cannot access 'clickhouse_exporter': No such file or directory
root@DAILACHDBUD002:~/clickhouse_exporter# apt install golang-go
root@DAILACHDBUD002:~/clickhouse_exporter# go build clickhouse_exporter.go
root@DAILACHDBUD002:~/clickhouse_exporter# ll clickhouse_exporter
-rwxr-xr-x 1 root root 12591899 Dec 21 07:04 clickhouse_exporter*
3、编译好clickhouse_exporter后，配置clickhouse_exporter开机启动，其中/root/clickhouse_exporter/clickhouse_exporter -scrape_uri=http://default:W123@localhost:8123/ &此处必须加上后缀&，否则后面的systemctl start clickhouse_exporter会一直无法正常启然后systemctl status clickhouse_exporter会看到一直处于Active: activating (start)启动的状态而不是正常的Active: active (running)
root@DAILACHDBUD002:~# cat /root/script/clickhouse_exporter.sh
#/bin/sh
/root/clickhouse_exporter/clickhouse_exporter -scrape_uri=http://default:W123@localhost:8123/ &
root@DAILACHDBUD002:~# cat /usr/lib/systemd/system/clickhouse_exporter.service
[Unit]
Description=clickhouse_exporter
After=network.target[Service]
User=root
Group=root
Type=forking
ExecStart=/bin/bash /root/script/clickhouse_exporter.sh
Restart=on-failure[Install]
WantedBy=multi-user.target
root@DAILACHDBUD002:~# systemctl enable clickhouse_exporter
Created symlink /etc/systemd/system/multi-user.target.wants/clickhouse_exporter.service → /lib/systemd/system/clickhouse_exporter.service.root@DAILACHDBUD002:~# systemctl start clickhouse_exporterroot@DAILACHDBUD002:~# systemctl status clickhouse_exporter
● clickhouse_exporter.service - clickhouse_exporterLoaded: loaded (/lib/systemd/system/clickhouse_exporter.service; enabled; vendor preset: enabled)Active: active (running) since Thu 2023-12-21 07:22:30 UTC; 3s ago
4、登陆Prometheus所在服务器，打开Prometheus配置文件vim /prometheus/prometheus-2.32.1/prometheus.yml，增加如下配置
- job_name: "clickhouse_exporter"scrape_timeout: 10smetrics_path: /metricsstatic_configs:- targets: ['172.22.137.132:9116']- targets: ['172.22.137.133:9116']- targets: ['172.22.137.134:9116']- targets: ['172.22.137.136:9116']
5、在https://grafana.com/grafana/dashboards/中查找Clickhouse的模板，在Grafana监控配置页面导入Clickhouse的模板https://grafana.com/grafana/dashboards/882-clickhouse/或https://grafana.com/grafana/dashboards/14432-clickhouse-metrics-on-settings/，然后在Grafana监控配置页面的数据源选项中选择Prometheus
这篇关于Clickhouse监控_使用Prometheus+Grafana来监控Clickhouse服务和性能指标的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
