华为设备WLAN配置之AP上线

本文主要是介绍华为设备WLAN配置之AP上线，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

WLAN基础配置之AP上线
配置WLAN无线网络的第一阶段，AP上线技术：
在这里插入图片描述
实验目标：使得AP能够获得来自AC的DHCP地址服务的地址，且是该网段地址池中的IP。
实验步骤：
1.把AC当作三层交换机配置虚拟网关
sys
Enter system view, return user view with Ctrl+Z.
[AC6605]undo in e
Info: Information center is disabled.
[AC6605]vlan 100
Info: This operation may take a few seconds. Please wait for a moment…done.
[AC6605-vlan100]int vlan 100
[AC6605-Vlanif100]ip add 172.16.100.1 24
[AC6605-Vlanif100]int g0/0/1
[AC6605-GigabitEthernet0/0/1]p l a
[AC6605-GigabitEthernet0/0/1]p d v 100
[AC6605-GigabitEthernet0/0/1]
2.配置核心交换机S-CORE
[S-CORE]vlan 100
[S-CORE-vlan100]q
[S-CORE]int g0/0/5 把与AC相连的接口加入互联vlan100
[S-CORE-GigabitEthernet0/0/5]p l a
[S-CORE-GigabitEthernet0/0/5]p d v 100
[S-CORE-GigabitEthernet0/0/5]q
[S-CORE]int g0/0/1 与下联链路配置trunk并放行VLAN10 VLAN 100的流量
[S-CORE-GigabitEthernet0/0/1]p l t
[S-CORE-GigabitEthernet0/0/1]p t a v 10 100

3.配置接入层交换机
[S]vlan b 10 100
Info: This operation may take a few seconds. Please wait for a moment…done.
[S]int e0/0/1
[S-Ethernet0/0/1]p l a
[S-Ethernet0/0/1]p d v 10
[S-Ethernet0/0/1]int e0/0/2
[S-Ethernet0/0/2]p l a
[S-Ethernet0/0/2]p d v 10
[S-Ethernet0/0/2]int e0/0/4
[S-Ethernet0/0/4]p l a
[S-Ethernet0/0/4]p d v 100
[S-Ethernet0/0/4]q
[S]dis vlan
[S]int e0/0/3
[S-Ethernet0/0/3]p l t
[S-Ethernet0/0/3]p t a v 10 100
[S-Ethernet0/0/3]
4. 在AC上配置DHCP服务
[AC6605]dhcp en
Info: The operation may take a few seconds. Please wait for a moment.done.
[AC6605]int vlan 100
[AC6605-Vlanif100]dhcp se
[AC6605-Vlanif100]dhcp select in
[AC6605-Vlanif100]dhcp select interface
[AC6605-Vlanif100]
5.在AP上查看是否获得了AC上的DHCP地址
在这里插入图片描述