本文主要是介绍gdb命令小抄，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
本文转自： http://blog.chinaunix.net/u/28499/showart_1154662.html作者：gawk
在精华区看到gdb的文章，
http://www.chinaunix.net/index.p ... read.php?tid=150524
内容太多，我做了一个小抄
欢迎大家补充
1.按TAB键两次会将命令或者函数名补齐
2.设置断点
break function
break linenum
break +offset 当前行号前offset行
break -offset 当前行号后offset行
break *address 运行内存地址处停止
break 下一行
break ... if condition ...可以是上述参数
3.设置观察点
watch expr 变量有变化停止
rwatch expr 变量被读停止
awatch expr 变量被读写时停止
4.设置捕捉点
catch event
event有如下:
throw catch exec fork vfork load unload
[Copy to clipboard] [ - ]
CODE: Raised signals may be caught:
catch signal - all signals
catch signal <signame> - a particular signal
Raised exceptions may be caught:
catch throw - all exceptions, when thrown
catch throw <exceptname> - a particular exception, when thrown
catch catch - all exceptions, when caught
catch catch <exceptname> - a particular exception, when caught
Thread or process events may be caught:
catch thread_start - any threads, just after creation
catch thread_exit - any threads, just before expiration
catch thread_join - any threads, just after joins
Process events may be caught:
catch start - any processes, just after creation
catch exit - any processes, just before expiration
catch fork - calls to fork()
catch vfork - calls to vfork()
catch exec - calls to exec()
Dynamically-linked library events may be caught:
catch load - loads of any library
catch load <libname> - loads of a particular library
catch unload - unloads of any library
catch unload <libname> - unloads of a particular library
The act of your program's execution stopping may also be caught:
catch stop
C++ exceptions may be caught:
catch throw - all exceptions, when thrown
catch catch - all exceptions, when caught
catch signal - all signals
catch signal <signame> - a particular signal
Raised exceptions may be caught:
catch throw - all exceptions, when thrown
catch throw <exceptname> - a particular exception, when thrown
catch catch - all exceptions, when caught
catch catch <exceptname> - a particular exception, when caught
Thread or process events may be caught:
catch thread_start - any threads, just after creation
catch thread_exit - any threads, just before expiration
catch thread_join - any threads, just after joins
Process events may be caught:
catch start - any processes, just after creation
catch exit - any processes, just before expiration
catch fork - calls to fork()
catch vfork - calls to vfork()
catch exec - calls to exec()
Dynamically-linked library events may be caught:
catch load - loads of any library
catch load <libname> - loads of a particular library
catch unload - unloads of any library
catch unload <libname> - unloads of a particular library
The act of your program's execution stopping may also be caught:
catch stop
C++ exceptions may be caught:
catch throw - all exceptions, when thrown
catch catch - all exceptions, when caught
4.停止条件维护
可以用condition命令来修改断点的条件，目前只有break watch支持if
condition <bnum> <expression>
condition <bnum> 清除停止条件
5.为停止点设定运行命令
可以用commands命令来设置
commands <bnum>
.....
end
6.其他有用的指令
finish 运行程序，直到当前函数完成
until或u运行程序直到退出循环体，用在for或者while上，比较方便
x命令增加如下
[Copy to clipboard] [ - ]
CODE: Examine memory: x/FMT ADDRESS.
ADDRESS is an expression for the memory address to examine.
FMT is a repeat count followed by a format letter and a size letter.
Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),
t(binary), f(float), a(address), i(instruction), c(char) and s(string).
Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).
The specified number of objects of the specified size are printed
according to the format.
Defaults for format and size letters are those previously used.
Default count is 1. Default address is following last thing printed
with this command or "print".
ADDRESS is an expression for the memory address to examine.
FMT is a repeat count followed by a format letter and a size letter.
Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),
t(binary), f(float), a(address), i(instruction), c(char) and s(string).
Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).
The specified number of objects of the specified size are printed
according to the format.
Defaults for format and size letters are those previously used.
Default count is 1. Default address is following last thing printed
with this command or "print".
-----------------------------------------------------------------------
参考资料:
gdb help
http://bbs.chinaunix.net/thread-150524-1-1.html
这篇关于gdb命令小抄的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
