防火墙未开端口导致zookeeper集群异常，kafka起不来

2024-01-02 17:44
文章标签 集群 异常 导致 zookeeper kafka 防火墙 起不来 开端

本文主要是介绍防火墙未开端口导致zookeeper集群异常，kafka起不来，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

湖蓝几何球体LinkedIn Banner.png
转载说明：如果您喜欢这篇文章并打算转载它，请私信作者取得授权。感谢您喜爱本文，请文明转载，谢谢。

问题描述：

主机信息：

IPhostname
10.0.0.10host10
10.0.0.12host12
10.0.0.13host13

在这三台主机上部署一套zookeeper&kafka集群环境的时候，zk集群进程和端口都起来了。然后在启动kafka的时候，报错了，提示连不上zk。
因为该环境要求必须开启防火墙，所以想到应该是因为2181端口没有开放，所以kafka去连zk，提示连不上。于是在修改了防火墙，打开了2181端口和kafka的9092端口：

[root@host10 ~]#  firewall-cmd --list-ports
2181/tcp  9092/tcp 
[root@host10 ~]#

然后重新启动kafka，依旧报错，报错信息如下：

[root@host10 ~]# /usr/local/kafka_2.11-0.11.0.0/bin/kafka-server-start.sh /usr/local/kafka_2.11-0.11.0.0/config/server.properties
[2018-06-15 11:33:25,244] INFO KafkaConfig values:advertised.host.name = null
......   省略若干信息
[2018-06-15 11:33:26,693] INFO Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,219] INFO Opening socket connection to server 10.0.0.12/10.0.0.12181. Will not attempt to authenticate using SASL (unknown error) (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,221] INFO Socket connection established to 10.0.0.12/10.0.0.12181, initiating session (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,222] INFO Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,910] INFO Opening socket connection to server 10.0.0.13/10.0.0.13181. Will not attempt to authenticate using SASL (unknown error) (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,911] INFO Socket connection established to 10.0.0.13/10.0.0.13181, initiating session (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:28,913] INFO Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:29,901] INFO Opening socket connection to server 10.0.0.10/10.0.0.10181. Will not attempt to authenticate using SASL (unknown error) (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:29,902] INFO Socket connection established to 10.0.0.10/10.0.0.10181, initiating session (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:29,905] INFO Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:31,133] INFO Opening socket connection to server 10.0.0.12/10.0.0.12181. Will not attempt to authenticate using SASL (unknown error) (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:31,135] INFO Socket connection established to 10.0.0.12/10.0.0.12181, initiating session (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:31,136] INFO Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:31,379] INFO Terminate ZkClient event thread. (org.I0Itec.zkclient.ZkEventThread)
[2018-06-15 11:33:31,553] INFO Session: 0x0 closed (org.apache.zookeeper.ZooKeeper)
[2018-06-15 11:33:31,555] FATAL Fatal error during KafkaServer startup. Prepare to shutdown (kafka.server.KafkaServer)
org.I0Itec.zkclient.exception.ZkTimeoutException: Unable to connect to zookeeper server '10.0.0.10:2181,10.0.0.12:2181,10.0.0.13:2181' with timeout of 6000 msat org.I0Itec.zkclient.ZkClient.connect(ZkClient.java:1233)at org.I0Itec.zkclient.ZkClient.<init>(ZkClient.java:157)at org.I0Itec.zkclient.ZkClient.<init>(ZkClient.java:131)at kafka.utils.ZkUtils$.createZkClientAndConnection(ZkUtils.scala:103)at kafka.utils.ZkUtils$.apply(ZkUtils.scala:85)at kafka.server.KafkaServer.initZk(KafkaServer.scala:338)at kafka.server.KafkaServer.startup(KafkaServer.scala:191)at kafka.server.KafkaServerStartable.startup(KafkaServerStartable.scala:38)at kafka.Kafka$.main(Kafka.scala:65)at kafka.Kafka.main(Kafka.scala)
[2018-06-15 11:33:31,555] INFO EventThread shut down for session: 0x0 (org.apache.zookeeper.ClientCnxn)
[2018-06-15 11:33:31,562] INFO shutting down (kafka.server.KafkaServer)
[2018-06-15 11:33:31,568] INFO shut down completed (kafka.server.KafkaServer)
[2018-06-15 11:33:31,568] FATAL Exiting Kafka. (kafka.server.KafkaServerStartable)
[2018-06-15 11:33:31,571] INFO shutting down (kafka.server.KafkaServer)

查看kafka的配置，并未发现任何异常。于是检查zk自身是否OK。但是进程、端口都一切正常。
使用./zkCli.sh去检查zk是否正常启动，出现了报错：

[root@host10 bin]# ./zkCli.sh
Connecting to localhost:2181
2018-06-15 14:44:05,215 [myid:] - INFO  [main:Environment@100] - Client environment:zookeeper.version=3.4.10-39d3a4f269333c922ed3db283be479f9deacaa0f, built on 03/23/2017 10:13 GMT
......    #省略若干信息
2018-06-15 14:44:05,225 [myid:] - INFO  [main:ZooKeeper@438] - Initiating client connection, connectString=localhost:2181 sessionTimeout=30000 watcher=org.apache.zookeeper.ZooKeeperMain$MyWatcher@1a86f2f1
Welcome to ZooKeeper!
2018-06-15 14:44:05,255 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/0:0:0:0:0:0:0:1:2181. Will not attempt to authenticate using SASL (unknown error)
JLine support is enabled
2018-06-15 14:44:05,334 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/0:0:0:0:0:0:0:1:2181, initiating session
2018-06-15 14:44:05,348 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1158] - Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect
[zk: localhost:2181(CONNECTING) 0] 2018-06-15 14:44:05,564 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/127.0.0.1:2181. Will not attempt to authenticate using SASL (unknown error)
2018-06-15 14:44:05,565 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/127.0.0.1:2181, initiating session
2018-06-15 14:44:05,573 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1158] - Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect
2018-06-15 14:44:07,626 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/0:0:0:0:0:0:0:1:2181. Will not attempt to authenticate using SASL (unknown error)
2018-06-15 14:44:07,627 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/0:0:0:0:0:0:0:1:2181, initiating session
2018-06-15 14:44:07,629 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1158] - Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect
2018-06-15 14:44:07,929 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/127.0.0.1:2181. Will not attempt to authenticate using SASL (unknown error)
2018-06-15 14:44:07,930 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/127.0.0.1:2181, initiating session
2018-06-15 14:44:07,932 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1158] - Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect
2018-06-15 14:44:09,329 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/0:0:0:0:0:0:0:1:2181. Will not attempt to authenticate using SASL (unknown error)
2018-06-15 14:44:09,330 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/0:0:0:0:0:0:0:1:2181, initiating session
2018-06-15 14:44:09,332 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1158] - Unable to read additional data from server sessionid 0x0, likely server has closed socket, closing socket connection and attempting reconnect
2018-06-15 14:44:09,464 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/127.0.0.1:2181. Will not attempt to authenticate using SASL (unknown error)

分析：

查看了网上很多的文章，有以下几种说法：
1、zk的myid文件和配置文件server.xx的编号对不上：
2、zk只启动了一个节点，其他节点没有起来

排查：
1、检查myid编号和配置文件，是OK的，能对上：

[root@host10 ~]# cat /data/zookeeper/myid
1
[root@host10 ~]#
[root@host10 ~]# vim /usr/local/zookeeper-3.4.10/conf/zoo.cfg
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
......  #省略若干
server.1=10.0.0.10:2888:3888   #server.1和myid文件的1是能对上的
server.2=10.0.0.12:2888:3888
server.3=10.0.0.13:2888:3888

2、zookeeper的配置文件zoo.cfg里面配置了三个server，实际上其他两个节点没有起来，因此根据zookeeper的选举算法，当整个集群超过半数机器宕机，zookeeper会认为集群处于不可用状态。

检查了三个节点的服务，都是起来了的。
试着将其中一台zk节点10.0.0.10，修改zoo.cfg，注释掉配置的其他两个server，只留本机的server配置：

[root@host10 ~]# vim /usr/local/zookeeper-3.4.10/conf/zoo.cfg
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
......  #省略若干
server.1=10.0.0.10:2888:3888   #注释掉server.2和server.3，只剩下本机节点
#server.2=10.0.0.12:2888:3888
#server.3=10.0.0.13:2888:3888

然后使用zkCli.sh去检测zk状态，就是OK的：

[root@host10 ~]# cd /usr/local/zookeeper-3.4.10/bin/
[root@host10 bin]# ./zkCli.sh
Connecting to localhost:2181
2018-06-15 15:58:10,586 [myid:] - INFO  [main:Environment@100] - Client environment:zookeeper.version=3.4.10-39d3a4f269333c922ed3db283be479f9deacaa0f, built on 03/23/2017 10:13 GMT
......  #省略若干
2018-06-15 15:58:10,597 [myid:] - INFO  [main:ZooKeeper@438] - Initiating client connection, connectString=localhost:2181 sessionTimeout=30000 watcher=org.apache.zookeeper.ZooKeeperMain$MyWatcher@1a86f2f1
Welcome to ZooKeeper!
2018-06-15 15:58:10,627 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1032] - Opening socket connection to server localhost/0:0:0:0:0:0:0:1:2181. Will not attempt to authenticate using SASL (unknown error)
JLine support is enabled
2018-06-15 15:58:10,708 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@876] - Socket connection established to localhost/0:0:0:0:0:0:0:1:2181, initiating session
[zk: localhost:2181(CONNECTING) 0] 2018-06-15 15:58:10,733 [myid:] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1299] - Session establishment complete on server localhost/0:0:0:0:0:0:0:1:2181, sessionid = 0x164023cac190003, negotiated timeout = 30000WATCHER::WatchedEvent state:SyncConnected type:None path:null[zk: localhost:2181(CONNECTED) 0]

于是想到是防火墙只开了zookeeper的2181端口。zk有三个端口：
3个端口的作用
1、2181：对cline端提供服务
2、3888：选举leader使用
3、2888：集群内机器通讯使用（Leader监听此端口）

因为防火墙的作用，三个节点之间2888和3888端口都是互相不通的，因此集群之前没有办法通信，可能就会以为是剩下两个节点都挂掉了。于是就出现了上面的报错

解决：

1、重新修改防火墙，打开2888和3888端口

[root@host10 ~]#  firewall-cmd --list-ports3888/tcp 2181/tcp 2888/tcp  9092/tcp 
[root@host10 ~]#

2、为保证万一，把整个zk集群全部按照顺序重启了一遍
3、三个几点依次都用zkCli.sh去连了一下，状态都是OK的
4、重新启动kafka，就OK啦

备注：本文为迁移博文，非近期遇到的故障

这篇关于防火墙未开端口导致zookeeper集群异常，kafka起不来的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！


http://www.chinasem.cn/article/563197。

相关文章

Java.lang.InterruptedException被中止异常的原因及解决方案

Java.lang.InterruptedException被中止异常的原因及解决方案

《Java.lang.InterruptedException被中止异常的原因及解决方案》Java.lang.InterruptedException是线程被中断时抛出的异常,用于协作停止执行,常见于... 目录报错问题报错原因解决方法Java.lang.InterruptedException 是 Jav
阅读更多...
Debian系和Redhat系防火墙配置方式

Debian系和Redhat系防火墙配置方式

《Debian系和Redhat系防火墙配置方式》文章对比了Debian系UFW和Redhat系Firewalld防火墙的安装、启用禁用、端口管理、规则查看及注意事项,强调SSH端口需开放、规则持久化,... 目录Debian系UFW防火墙1. 安装2. 启用与禁用3. 基本命令4. 注意事项5. 示例配置R
阅读更多...
Spring Boot 中的默认异常处理机制及执行流程

Spring Boot 中的默认异常处理机制及执行流程

《SpringBoot中的默认异常处理机制及执行流程》SpringBoot内置BasicErrorController,自动处理异常并生成HTML/JSON响应,支持自定义错误路径、配置及扩展,如... 目录Spring Boot 异常处理机制详解默认错误页面功能自动异常转换机制错误属性配置选项默认错误处理
阅读更多...
SpringBoot 异常处理/自定义格式校验的问题实例详解

SpringBoot 异常处理/自定义格式校验的问题实例详解

《SpringBoot异常处理/自定义格式校验的问题实例详解》文章探讨SpringBoot中自定义注解校验问题,区分参数级与类级约束触发的异常类型,建议通过@RestControllerAdvice... 目录1. 问题简要描述2. 异常触发1) 参数级别约束2) 类级别约束3. 异常处理1) 字段级别约束
阅读更多...
Spring boot整合dubbo+zookeeper的详细过程

Spring boot整合dubbo+zookeeper的详细过程

《Springboot整合dubbo+zookeeper的详细过程》本文讲解SpringBoot整合Dubbo与Zookeeper实现API、Provider、Consumer模式,包含依赖配置、... 目录Spring boot整合dubbo+zookeeper1.创建父工程2.父工程引入依赖3.创建ap
阅读更多...
zookeeper端口说明及介绍

zookeeper端口说明及介绍

《zookeeper端口说明及介绍》：本文主要介绍zookeeper端口说明,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录一、zookeeper有三个端口（可以修改）aVNMqvZ二、3个端口的作用三、部署时注意总China编程结一、zookeeper有三个端口（可以
阅读更多...
Jenkins分布式集群配置方式

Jenkins分布式集群配置方式

《Jenkins分布式集群配置方式》：本文主要介绍Jenkins分布式集群配置方式,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录1.安装jenkins2.配置集群总结Jenkins是一个开源项目，它提供了一个容易使用的持续集成系统，并且提供了大量的plugin满
阅读更多...
Spring Boot @RestControllerAdvice全局异常处理最佳实践

Spring Boot @RestControllerAdvice全局异常处理最佳实践

《SpringBoot@RestControllerAdvice全局异常处理最佳实践》本文详解SpringBoot中通过@RestControllerAdvice实现全局异常处理,强调代码复用、统... 目录前言一、为什么要使用全局异常处理？二、核心注解解析1. @RestControllerAdvice2
阅读更多...
Java进程异常故障定位及排查过程

Java进程异常故障定位及排查过程

《Java进程异常故障定位及排查过程》：本文主要介绍Java进程异常故障定位及排查过程,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录一、故障发现与初步判断1. 监控系统告警2. 日志初步分析二、核心排查工具与步骤1. 进程状态检查2. CPU 飙升问题3. 内存
阅读更多...
Redis分片集群、数据读写规则问题小结

Redis分片集群、数据读写规则问题小结

《Redis分片集群、数据读写规则问题小结》本文介绍了Redis分片集群的原理,通过数据分片和哈希槽机制解决单机内存限制与写瓶颈问题,实现分布式存储和高并发处理,但存在通信开销大、维护复杂及对事务支持... 目录一、分片集群解android决的问题二、分片集群图解 分片集群特征如何解决的上述问题？（与哨兵模
阅读更多...

Copyright China编程 23002807@qq.com

沪ICP备2023033072号-2