HP C7000刀片服务器北电GbE2c背板网络交换机更改用户名密码

本文主要是介绍HP C7000刀片服务器北电GbE2c背板网络交换机更改用户名密码，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

HP C7000刀片服务器使用的GbE2c刀片背板网络交换机和传统的华为、思科等厂商设备的配置方式很不一样，配置起来比较复杂，本文是对其进行用户密码修改的样例。

1、字符界面修改

北电的命令行为层级式菜单操作，cd命令可以返回到根级，cd ..可以返回到上一级

通过telnet到设备上进行操作：

------------------------------------------------------------
[Main Menu]Jan  3 18:00:12 10.193.199.4 NOTICE  mgmt: admin(admin) login from host 10.227.17.234info     - Information Menustats    - Statistics Menucfg      - Configuration Menuoper     - Operations Command Menuboot     - Boot Options Menumaint    - Maintenance Menudiff     - Show pending config changes  [global command]apply    - Apply pending config changes [global command]save     - Save updated config to FLASH [global command]revert   - Revert pending or applied changes [global command]exit     - Exit  [global command, always available]>> Main# cfg
------------------------------------------------------------
[Configuration Menu]sys      - System-wide Parameter Menuport     - Port Menuqos      - QOS Menuacl      - Access Control List Menupmirr    - Port Mirroring Menul2       - Layer 2 Menul3       - Layer 3 Menurmon     - RMON Menuufd      - Uplink Failure Detection Menusetup    - Step by step configuration set updump     - Dump current configuration to script fileptcfg    - Backup current configuration to FTP/TFTP servergtcfg    - Restore current configuration from FTP/TFTP servercur      - Display current configuration>> Configuration# sys
------------------------------------------------------------
[System Menu]syslog   - Syslog Menusshd     - SSH Server Menuradius   - RADIUS Authentication Menutacacs+  - TACACS+ Authentication Menuntp      - NTP Server Menussnmp    - System SNMP Menuaccess   - System Access Menudate     - Set system datetime     - Set system timetimezone - Set system timezoneolddst   - Set system DST for US prior to 2007dlight   - Set system daylight savingsidle     - Set timeout for idle CLI sessionsnotice   - Set login noticebannr    - Set login bannerhprompt  - Enable/disable display hostname (sysName) in CLI promptbootp    - Enable/disable use of BOOTPdhcp     - Enable/disable use of DHCP on Mgmt interfacereminder - Enable/disable Remindersrstctrl  - Enable/disable System reset on paniccur      - Display current system-wide parameters>> System# access
------------------------------------------------------------
[System Access Menu]mgmt     - Management Network Definition Menuuser     - User Access Control Menu (passwords)https    - HTTPS Web Access Menusnmp     - Set SNMP access controltnport   - Set Telnet server port numbertport    - Set the TFTP Port for the systemwport    - Set HTTP (Web) server port numberhttp     - Enable/disable HTTP (Web) accesstnet     - Enable/disable Telnet accesstsbbi    - Enable/disable Telnet/SSH configuration from BBIuserbbi  - Enable/disable user configuration from BBIcur      - Display current system access configuration>> System Access# user
------------------------------------------------------------
[User Access Control Menu]uid      - User ID Menueject    - Eject userusrpw    - Set user password (user)opw      - Set operator password (oper)admpw    - Set administrator password (admin)cur      - Display current user status>> User Access Control# curUsernames:user     - enabled    - offline   oper     - disabled   - offline   admin    - Always Enabled - online     3 sessions.

可见缺省有3个用户，其中user和admin是可用状态。

通过在cfg-sys-access-user层级的usrpw和admpw指令可以分别对user和admin用户指令进行修改。修改以后diff可以显示配置变化，apply可使修改生效，save可以保存修改到永久文件。凡是修改，apply-save是必须要做的。

2、图形界面修改

1、帐户管理的图形界面如下：

执行修改用户名密码会报错：

2、需要先在命令行去打开BBI配置功能，操作如下：

------------------------------------------------------------
[Main Menu]Jan  3 17:38:25 10.193.199.4 NOTICE  mgmt: admin(admin) login from host 10.227.17.234info     - Information Menustats    - Statistics Menucfg      - Configuration Menuoper     - Operations Command Menuboot     - Boot Options Menumaint    - Maintenance Menudiff     - Show pending config changes  [global command]apply    - Apply pending config changes [global command]save     - Save updated config to FLASH [global command]revert   - Revert pending or applied changes [global command]exit     - Exit  [global command, always available]>> Main# cfg
------------------------------------------------------------
[Configuration Menu]sys      - System-wide Parameter Menuport     - Port Menuqos      - QOS Menuacl      - Access Control List Menupmirr    - Port Mirroring Menul2       - Layer 2 Menul3       - Layer 3 Menurmon     - RMON Menuufd      - Uplink Failure Detection Menusetup    - Step by step configuration set updump     - Dump current configuration to script fileptcfg    - Backup current configuration to FTP/TFTP servergtcfg    - Restore current configuration from FTP/TFTP servercur      - Display current configuration>> Configuration# 
Jan  3 17:38:53 10.193.199.4 NOTICE  mgmt: admin idle timeout from BBI
sys
------------------------------------------------------------
[System Menu]syslog   - Syslog Menusshd     - SSH Server Menuradius   - RADIUS Authentication Menutacacs+  - TACACS+ Authentication Menuntp      - NTP Server Menussnmp    - System SNMP Menuaccess   - System Access Menudate     - Set system datetime     - Set system timetimezone - Set system timezoneolddst   - Set system DST for US prior to 2007dlight   - Set system daylight savingsidle     - Set timeout for idle CLI sessionsnotice   - Set login noticebannr    - Set login bannerhprompt  - Enable/disable display hostname (sysName) in CLI promptbootp    - Enable/disable use of BOOTPdhcp     - Enable/disable use of DHCP on Mgmt interfacereminder - Enable/disable Remindersrstctrl  - Enable/disable System reset on paniccur      - Display current system-wide parameters>> System# access
------------------------------------------------------------
[System Access Menu]mgmt     - Management Network Definition Menuuser     - User Access Control Menu (passwords)https    - HTTPS Web Access Menusnmp     - Set SNMP access controltnport   - Set Telnet server port numbertport    - Set the TFTP Port for the systemwport    - Set HTTP (Web) server port numberhttp     - Enable/disable HTTP (Web) accesstnet     - Enable/disable Telnet accesstsbbi    - Enable/disable Telnet/SSH configuration from BBIuserbbi  - Enable/disable user configuration from BBIcur      - Display current system access configuration>> System Access# userbbi
Current User config from BBI: disabled
Enter new User config from BBI [d/e]: e>> System Access# diff
=> Pending configuration/c/sys/accessuserbbi ena

apply和save以后，在图形界面重新刷新

即可进行密码修改：