本文主要是介绍查看 WSL2 (Windows Subsystem for Linux 2) IP 地址，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
查看 WSL2 [Windows Subsystem for Linux 2] IP 地址
- 1. `ipconfig`
- 2. `ping $(hostname).local`
- 3. `cat /etc/resolv.conf`
- 4. `ip route show`
- 5. `ip addr`
- References
1. ipconfig
Windows 系统上与 WSL2 (Windows Subsystem for Linux 2) 接口的地址 172.31.32.1。
Microsoft Windows [版本 10.0.22631.3593]
(c) Microsoft Corporation。保留所有权利。C:\Users\cheng>ipconfigWindows IP 配置以太网适配器 以太网 2:媒体状态 . . . . . . . . . . . . : 媒体已断开连接连接特定的 DNS 后缀 . . . . . . . :无线局域网适配器 本地连接* 8:媒体状态 . . . . . . . . . . . . : 媒体已断开连接连接特定的 DNS 后缀 . . . . . . . :无线局域网适配器 本地连接* 9:媒体状态 . . . . . . . . . . . . : 媒体已断开连接连接特定的 DNS 后缀 . . . . . . . :无线局域网适配器 WLAN 2:...以太网适配器 vEthernet (WSL (Hyper-V firewall)):连接特定的 DNS 后缀 . . . . . . . :本地链接 IPv6 地址. . . . . . . . : fe80::ed84:13c8:f7e2:6918%45IPv4 地址 . . . . . . . . . . . . : 172.31.32.1子网掩码 . . . . . . . . . . . . : 255.255.240.0默认网关. . . . . . . . . . . . . :C:\Users\cheng>
2. ping $(hostname).local
Windows 系统上与 WSL2 (Windows Subsystem for Linux 2) 接口的地址 172.31.32.1。
(base) yongqiang@yongqiang:~$ ping $(hostname).local
PING yongqiang (172.31.32.1) 56(84) bytes of data.
...
3. cat /etc/resolv.conf
Windows 系统上与 WSL2 (Windows Subsystem for Linux 2) 接口的地址 172.31.32.1。
(base) yongqiang@yongqiang:~$ cat /etc/resolv.conf
# This file was automatically generated by WSL. To stop automatic generation of this file, add the following entry to /etc/wsl.conf:
# [network]
# generateResolvConf = false
nameserver 172.31.32.1
(base) yongqiang@yongqiang:~$
4. ip route show
Windows 系统上与 WSL2 (Windows Subsystem for Linux 2) 接口的地址 172.31.32.1。
(base) yongqiang@yongqiang:~$ ip route show
default via 172.31.32.1 dev eth0 proto kernel
172.31.32.0/20 dev eth0 proto kernel scope link src 172.31.33.1
(base) yongqiang@yongqiang:~$
(base) yongqiang@yongqiang:~$ ip route show | grep -i default
default via 172.31.32.1 dev eth0 proto kernel
(base) yongqiang@yongqiang:~$
5. ip addr
WSL2 (Windows Subsystem for Linux 2) 的 IP 地址 172.31.33.1。
(base) yongqiang@yongqiang:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00inet 127.0.0.1/8 scope host lovalid_lft forever preferred_lft foreverinet6 ::1/128 scope hostvalid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000link/ether 00:15:5d:10:1c:0d brd ff:ff:ff:ff:ff:ffinet 172.31.33.1/20 brd 172.31.47.255 scope global eth0valid_lft forever preferred_lft foreverinet6 fe80::215:5dff:fe10:1c0d/64 scope linkvalid_lft forever preferred_lft forever
(base) yongqiang@yongqiang:~$
References
[1] Yongqiang Cheng, https://yongqiang.blog.csdn.net/
这篇关于查看 WSL2 (Windows Subsystem for Linux 2) IP 地址的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
